Since I started my degree in Architecture, I have been using AutoCAD and let me tell you that it is vital to choose a laptop that can fluently run this essential program for any Designer, Architect, Engineer and students of these careers.
The truth is that not all computers can run this program and if you do not want a slow experience that makes you waste valuable design time, you should read the ideal characteristics that a computer should have. laptop for AutoCAD And to make your choice easier, we recommend 9 outstanding models in USA.
|
Index: 1. Laptops for AutoCAD 2. What does a laptop need to run AutoCAD? 3. Best laptops for AutoCAD 9. Lenovo Ideapad 5i Pro 8. MSI GV15 7. HP Victus 15 6. Asus TUF Gaming F15 5. Acer Nitro 5 4. Acer Nitro 17 3. MacBook Air M2 2. Asus TUF Dash 15 1. MSI Thin GF63 4. Comparison of the best laptops for AutoCAD |
What does a laptop need to run AutoCAD on Windows and Mac?
AutoCAD is a 2D and 3D drawing program used to develop architectural, urban, civil, industrial and mechanical projects, where a powerful processor, good RAM memory and a dedicated GPU are the keys to fast and fluid use.
The official page recommends the following specifications for installation, which I share with you in summary mode, for both Windows and Mac:
- Processor: 2.5 to 2.9 GHz Base or Apple M Series Chip. Ideal greater than 3.0GHz
- RAM memory: 8GB RAM. Ideal 16GB RAM
- Graphics Card: Dedicated 1GB GPU. Ideal 4GB
- Display: IPS 1920x1080 or Retina
- Hard Drive Space: 10GB SSD
The best laptops for AutoCAD
That said, below I share with you a careful selection of recommended laptops for AutoCAD, starting with the cheap laptops for AutoCAD:
9. Lenovo Ideapad 5i Pro
The best cheap laptop for AutoCAD
These are the most notable technical specifications of the Lenovo laptop for AutoCAD, Lenovo IdeaPad 5i Pro:
- Processor: Intel Core i5 11300H (3.1GHz to 4.4GHz)
- RAM memory: 8GB
- Graphics Card: 2GB NVIDIA GeForce MX450
- Display: IPS 2560x1600 16"
- Hard Drive: 512GB SSD
- Battery: 10 hours
- Operating System: Windows 11 Home
- Ports: 2 USB 3.2 Type A Gen 1, USB 2.0 type C, Thunderbolt 4, SD, HDMI 1.4b
- Weight: 4.18 pounds
We start with the Lenovo IdeaPad 5i Pro. A cheap laptop for AutoCAD with the basic requirements for use, standing out for its 16-inch IPS screen with a 2K resolution that your eyes will appreciate when drawing comfortably, it is also a lightweight laptop with excellent autonomy that will will allow you to work with AutoCAD on the go.
8. MSI GV15
The best laptop for AutoCAD
These are the most notable technical specifications of the MSI laptop for AutoCAD, MSI GV15:
- Processor: Intel Core i5 11400H (2.7GHz to 4.5GHz)
- RAM memory: 8GB
- Graphics Card: 4GB NVIDIA GeForce GTX 1650
- Display: IPS 1920x1080 15.6" (144Hz)
- Hard Drive: 256GB SSD
- Battery: 8 hours
- Operating System: Windows 11
- Ports: 3 USB 3.2 gen 1, USB 3.2 type C
- Weight: 4.62 pounds
The MSI GV15 is an affordable AutoCAD laptop that It stands out for its quality-price ratio, ideal for a student of Architecture, Engineering and Design who is looking for an all-terrain computer to carry out his studies, leaving us with some extra ports.
7. HP Victus 15
The best cheap laptop for AutoCAD
These are the most notable technical specifications of the HP laptop for AutoCAD, HP Victus 15:
- Processor: AMD Ryzen 5 7535HS (3.3GHz to 4.55GHz)
- RAM memory: 16GB
- Graphics Card: 4GB NVIDIA GeForce RTX 2050
- Display: IPS 1920x1080 15.6" (144Hz)
- Hard Drive: 1TB SSD
- Battery: 7 hours
- Operating System: Windows 11 Home
- Ports: 2 USB 3.0 Type A, 1 USB 3.0 Type C, SD, HDMI 2.1
- Weight: 5.09 pounds
The HP Victus 15 is ideal for you, yes You are looking for an affordable notebook for AutoCAD, with a good processor, excess RAM memory to simultaneously do other tasks, in addition to drawing, an illuminated keyboard and excellent storage capacity to store all your architectural plans. One point against it, its weight.
6. Asus TUF Gaming F15
The best laptop for gaming and AutoCAD
These are the most notable technical specifications of the Asus laptop for AutoCAD, Asus TUF Gaming F15 FX506HF-ES51:
- Processor: Intel Core i5 11400H (2.7GHz to 4.5GHz)
- RAM memory: 8GB
- Graphics Card: 4GB NVIDIA GeForce RTX 2050
- Display: IPS 1920x1080 15.6" (144Hz)
- Hard Drive: 512GB SSD
- Battery: 4 hours
- Operating System: Windows 11 Home
- Ports: Thunderbolt 4, 3 USB 3.2 Gen 1 Type A, HDMI 2.0b
- Weight: 5.07 pounds
Then, the Asus TUF Gaming is a computer for AutoCAD with a good quality-price ratio, with the right requirements to run software for Architecture, highlighting its clear screen, viewing plans fluidly, illuminated keyboard for working at night and its good versatility of ports to connect a drawing mouse.
5. Acer Nitro 5
The best budget laptop for AutoCAD
These are the most notable technical specifications of the Acer laptop for AutoCAD, Acer Nitro 5 model AN515-58-57Y8:
- Processor: Intel Core i5 12500H (3.3GHz to 4.5GHz)
- RAM memory: 16GB
- Graphics Card: 4GB NVIDIA GeForce RTX 3050 Ti
- Display: IPS 1920x1080 15.6" (144Hz)
- Hard Drive: 512GB SSD
- Battery: 3 hours
- Operating System: Windows 11 Home
- Ports: Thunderbolt 4, 2 USB 3.2 Gen 2, USB 3.2 Gen 1, HDMI 2.1
- Weight: 5.51 pounds
Leaving aside its weight and autonomy to improve. The Acer Nitro 5 stands out for its fast processor and RAM memory to run AutoCAD fluently without slowing down, also with a dedicated 4GB GPU and an IPS screen ideal for viewing the line qualities of your home or commercial projects.
4. Acer Nitro 17
The best laptop for AutoCAD and SolidWorks
These are the most notable technical specifications of the Acer Nitro 17 laptop model AN17-41-R6L9:
- Processor: AMD Ryzen 7 7840HS (3.8GHz to 5.1GHz)
- RAM memory: 16GB
- Graphics Card: 6GB NVIDIA GeForce RTX 4050
- Display: IPS 1920x1080 17.3" (165Hz)
- Hard Drive: 1TB SSD
- Battery: 3 hours
- Operating System: Windows 11 Home
- Ports: Thunderbolt 4, 2 USB 3.2 Type A, USB 3.2 Type C, HDMI
- Weight: 6.61 pounds
Another good laptop to use AutoCAD is the Acer Nitro 17. PC that stands out for its 17-inch screen that will allow you to design architectural details and cuts in a comfortable way for your eyes, as well as having fluid performance thanks to its excellent specifications (AMD Ryzen 7, 16GB RAM, 6GB NVIDIA and 1TB SSD) its weakest points, the battery life and that it is very heavy.
3. MacBook Air M2
The best notebook to work with AutoCAD
These are the most notable technical specifications of the Apple laptop for AutoCAD, MacBook Air M2 2022:
- Processor: Apple M2 Chip (3.4GHz)
- RAM memory: 8GB
- Graphics Card: 10-core GPU
- Display: Liquid Retina IPS 2560x1664 13.6"
- Hard Drive: 256GB SSD
- Battery: 18 hours
- Operating System: Mac Os
- Ports: 2 Thunderbolt
- Weight: 2.73 pounds
Probably the best brand of laptop for AutoCAD. The MacBook Air It is a light and thin laptop perfect for the drawing and design in mobility, without having to struggle with autonomy, offering you little more than 1 business day, on top of that with a Liquid Retina screen that will make your projects look clear to your clients, finally, I would have liked an HDMI port and a little more storage.
2. Asus TUF Dash 15
The best laptop for Revit and AutoCAD
These are the most notable technical specifications of the Asus TUF Dash 15 FX517ZM-AS73 laptop:
- Processor: Intel Core i7 12650H (3.5GHz to 4.7GHz)
- RAM memory: 16GB
- Graphics Card: 6GB NVIDIA GeForce RTX 3060
- Display: IPS 1920x1080 15.6" (144Hz)
- Hard Drive: 512GB SSD
- Battery: 4 hours
- Operating System: Windows 11 Home
- Ports: Thunderbolt 4, 2 USB 3.2 Gen1 Type A, USB 3.2 Gen2 Type C, HDMI 2.0b
- Weight: 4.4 pounds
The Asus TUF Dash is a laptop ideal for AutoCADwith a powerful processor and graphics card for superior performance, also considering its specifications, it has a lightweight design, just enough to transport it comfortably to your jobs, with an illuminated keyboard and an autonomy that we owe.
1. MSI Thin GF63
The best laptop for AutoCAD
These are the most notable technical specifications of the MSI Thin GF63 12VE-066US laptop:
- Processor: Intel Core i7 12650H (3.5GHz to 4.7GHz)
- RAM memory: 16GB
- Graphics Card: 6GB NVIDIA GeForce RTX 4050
- Display: IPS 1920x1080 15.6" (144Hz)
- Hard Drive: 512GB SSD
- Battery: 7 hours
- Operating System: Windows 11 Pro
- Ports: USB 3.2 Gen 1 Type C, 3 USB 3.2 Gen 1 Type A, HDMI 4K
- Weight: 4.1 pounds
Maybe one of the best quality price laptops for AutoCAD. The MSI Thin GF63 It is a recommended laptop for Autodesk, software for 3D design and construction.
It has a processor Intel Core i7 12th generation, 16GB of upgradable RAM, 6GB GPU, adequate battery life and a surprising weight to continue the strokes wherever you are, resulting in a fast and speedy computer for demanding tasks, Architecture, Engineering, Graphic Design y Industrial Design.
Comparative of the best laptops for AutoCAD
Are you looking for a laptop that supports AutoCAD? In the following comparative table you can analyze the most outstanding specifications of the best laptops for AutoCAD recommended for their high quality-price ratio in USA:
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
